 | |  | |  |
 | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  | |  |
Any frame milling in order to accommodate decoders or speaker $25.00
DCC
Custom Trains will install free of charge any HO decoders purchased from us!
 | |  | |  | |  |
D13SR: 1.3 Amp (2 Amp peak) rating and three function outputs. Size: 1.63" x 0.63" x
0.120" (very thin).
D13SRP: 1.3 Amp (2 Amp peak) rating, three function outputs, and eight-pin plug.
Size: 1.63" x 0.63" x 0.12".
D13SRJ: This HO sized decoder with nine-pin connectorized wiring harness provides
easy installation. With 1.3 Amp (2 Amp peak) motor drive it also has six function
outputs. Size: 1.00" x 0.63" x 0.25".
D15SRP: This HO sized decoder with connectorized wiring harness provides easy
installation. With 1.3 Amp (2 Amp peak) motor drive it also has six function outputs.
Terminates in an eight-pin plug. Size: 1.00" x 0.63" x 0.25".
D18SR: Direct plug-in HO decoder, 8 function outputs, NMRA 8 pin, 0.630 x
1.500.With 1.3 Amp (2 Amp peak) motor drive. Terminates in an eight-pin plug. Size:
1.00" x 0.63" x 0.25".
0.120" (very thin).
D13SRP: 1.3 Amp (2 Amp peak) rating, three function outputs, and eight-pin plug.
Size: 1.63" x 0.63" x 0.12".
D13SRJ: This HO sized decoder with nine-pin connectorized wiring harness provides
easy installation. With 1.3 Amp (2 Amp peak) motor drive it also has six function
outputs. Size: 1.00" x 0.63" x 0.25".
D15SRP: This HO sized decoder with connectorized wiring harness provides easy
installation. With 1.3 Amp (2 Amp peak) motor drive it also has six function outputs.
Terminates in an eight-pin plug. Size: 1.00" x 0.63" x 0.25".
D18SR: Direct plug-in HO decoder, 8 function outputs, NMRA 8 pin, 0.630 x
1.500.With 1.3 Amp (2 Amp peak) motor drive. Terminates in an eight-pin plug. Size:
1.00" x 0.63" x 0.25".
NCE
Decoders
Z14SR: Our smallest decoder!! 1 Amp (1.25 Amp peak) rating and four function
outputs. Size: 0.34" x 0.56" x 0.125".
Z14SRP: 1 Amp (1.25 Amp peak) rating and four function outputs, and eight-pin
plug. Size: 0.34" x 0.56" x 0.125".
N12SR: 1 Amp (1.25 Amp peak) rating and two function outputs. Size: 0.34" x
0.70" x 0.120".
N12SRP: 1 Amp (1.25 Amp peak) rating, two function outputs, and eight-pin plug.
Size: 0.34" x 0.70" x 0.120".
N12A1: Plug and Play decoder for the N scale Atlas SD50, SD60M, SD60. 1 Amp
(1.25 peak) rating. Golden Glow LEDs are included and installed. Size: 2.65" x
0.370" x 0.120".
N12AO: Plug and Play decoder for the N scale Atlas GP40-2, U25B, B23-7, 30-7,
36-7, GP38, SD25, Trainmaster, etc. 1 Amp (1.25 peak) rating. Golden Glow
LEDs are included and installed. Size: 2.65" x 0.370" x 0.120".
N12A01: Plug and Play decoder for the N scale Intermountain Tunnel Motor. 1
Amp (1.25 peak) rating. Golden Glow LEDs are included and installed. Size:
2.95" x 0.370" x 0.120".
outputs. Size: 0.34" x 0.56" x 0.125".
Z14SRP: 1 Amp (1.25 Amp peak) rating and four function outputs, and eight-pin
plug. Size: 0.34" x 0.56" x 0.125".
N12SR: 1 Amp (1.25 Amp peak) rating and two function outputs. Size: 0.34" x
0.70" x 0.120".
N12SRP: 1 Amp (1.25 Amp peak) rating, two function outputs, and eight-pin plug.
Size: 0.34" x 0.70" x 0.120".
N12A1: Plug and Play decoder for the N scale Atlas SD50, SD60M, SD60. 1 Amp
(1.25 peak) rating. Golden Glow LEDs are included and installed. Size: 2.65" x
0.370" x 0.120".
N12AO: Plug and Play decoder for the N scale Atlas GP40-2, U25B, B23-7, 30-7,
36-7, GP38, SD25, Trainmaster, etc. 1 Amp (1.25 peak) rating. Golden Glow
LEDs are included and installed. Size: 2.65" x 0.370" x 0.120".
N12A01: Plug and Play decoder for the N scale Intermountain Tunnel Motor. 1
Amp (1.25 peak) rating. Golden Glow LEDs are included and installed. Size:
2.95" x 0.370" x 0.120".
PH-PRO DCC Systems
Power Pro 5Amp starter set (P515 is recommended power supply)
PH-PRO-R Power Pro 5Amp starter Set with radio (P515 is recommended power supply)
PH-10 Powerhouse Pro - 10 Amp system
PH-10R 10 Amp starter system with radio
CS02 Command Station portion only of Power Pro (no cab, booster or decoders)
PH-box PH-Pro main system box with connectors only
RB02 Wireless base station, 916MHz
RPT1 Wireless Repeater, 916 MHz
Power Cab Entry level DCC starter set, with 14v/240VAC power supply
Smart Booster 3 Amp booster for Power Cab
USB interface Computer interface, Power Cab to USB
Power Supplies
P515 15 Volt AC, 5 Amp power supply suitable for PH-Pro, PB105, Digitrax, etc.
P114 14 Volt DC, 1.3 Amp power supply suitable for Power Cab.
Boosters
PB105 5 Amp booster, adds 5 amps additional power to layout (requires P515)
PB110 10 Amp power booster (for large scale only)
Walk around throttles
ProCab Deluxe Cab, Backlit LCD w/digital encoder, extra features
ProCab-R ProCab with radio installed 249.95 174.97
CAB04p Intermediate Cab, w/potentiometer speed knob
CAB04pr CAB04p with radio installed
CAB04e Intermediate Cab, w/ digital encoder, 2 train control
CAB04er CAB04e with radio installed
tba CAB05 Intermediate Cab, w/speed buttons
tba RX-433 Simplex wireless base station, 433MHz tba
Antenna-HG High Gain Antenna, 900MHz
Accessory (turnout) decoders
Switch-It Accessory decoder for two stall motor switch machines
Snap-It Accessory decoder for one twin coil motor switch machine
Switch-Kat Accessory decoder to control one Kato Unitrack remote swirch
Switch-8 Accessory decoder for 8 Tortoise switch machines
Signal decoders, block detectors, power control
BD20 Block detector for DCC, .01 to 20 Amps
AIU01 Auxiliary Input Unit
SIG-4 Signal decoder for up to four signal heads
tbd SIG-12+ EB Signal Decoder, controls 2 signal heads, use with DCC or stand alone. Has internal occupancy detector PLUS adjustable (3-5 Amps) electronic circuit breaker.
tbd EB1 Single output electronic circuit breaker (3-5 amps) with status LEDs and optoisolated outputs for short circuit and block detection.
EB3 Triple output adjustable (2,3,or 4 Amps) electronic circuit breaker with status LEDs.
Accessories to help wire your layout
tbd Macro Panel Use to build turnout or CTC control panels. Issues Macro, accessory or signal commands over Cab Bus
tbd Indicator Panel Use to display block ocupancy on CTC or other control type panels. Controls 16 LEDs
tbd Light-It Layout scenery lighting controller/decoder/sequencer. 16 high power outputs
Cab bus wiring aids
UTP Panel Cab Bus fascia panel w/RJ12 connectors
DIN Panel Cab Bus panel w/DIN connectors (preferred for clubs)!
Coilcord-R6 Six foot RJ12 coil cable for cabs
RJ12-7 Seven foot RJ12 cable for UTP/DIN panel wiring
RJ12-12 Twelve foot RJ12 cable for UTP/DIN panel wiring
Coilcord-DIN 7 foot coiled cord with molded right angle DIN plug
0 RJ12-40 Forty foot RJ12 cable for RPT1 wiring
Other stuff
tba Sniff-It NCE Cab Bus and DCC packet analyzer. Uses PC with Hyperterminal
Plug pack Ten pack of NMRA 8 pin plugs
DTK Decoder tester, tests motor and 4 functions
LED pack Ten pack of Sunny White LEDs
Power Pro 5Amp starter set (P515 is recommended power supply)
PH-PRO-R Power Pro 5Amp starter Set with radio (P515 is recommended power supply)
PH-10 Powerhouse Pro - 10 Amp system
PH-10R 10 Amp starter system with radio
CS02 Command Station portion only of Power Pro (no cab, booster or decoders)
PH-box PH-Pro main system box with connectors only
RB02 Wireless base station, 916MHz
RPT1 Wireless Repeater, 916 MHz
Power Cab Entry level DCC starter set, with 14v/240VAC power supply
Smart Booster 3 Amp booster for Power Cab
USB interface Computer interface, Power Cab to USB
Power Supplies
P515 15 Volt AC, 5 Amp power supply suitable for PH-Pro, PB105, Digitrax, etc.
P114 14 Volt DC, 1.3 Amp power supply suitable for Power Cab.
Boosters
PB105 5 Amp booster, adds 5 amps additional power to layout (requires P515)
PB110 10 Amp power booster (for large scale only)
Walk around throttles
ProCab Deluxe Cab, Backlit LCD w/digital encoder, extra features
ProCab-R ProCab with radio installed 249.95 174.97
CAB04p Intermediate Cab, w/potentiometer speed knob
CAB04pr CAB04p with radio installed
CAB04e Intermediate Cab, w/ digital encoder, 2 train control
CAB04er CAB04e with radio installed
tba CAB05 Intermediate Cab, w/speed buttons
tba RX-433 Simplex wireless base station, 433MHz tba
Antenna-HG High Gain Antenna, 900MHz
Accessory (turnout) decoders
Switch-It Accessory decoder for two stall motor switch machines
Snap-It Accessory decoder for one twin coil motor switch machine
Switch-Kat Accessory decoder to control one Kato Unitrack remote swirch
Switch-8 Accessory decoder for 8 Tortoise switch machines
Signal decoders, block detectors, power control
BD20 Block detector for DCC, .01 to 20 Amps
AIU01 Auxiliary Input Unit
SIG-4 Signal decoder for up to four signal heads
tbd SIG-12+ EB Signal Decoder, controls 2 signal heads, use with DCC or stand alone. Has internal occupancy detector PLUS adjustable (3-5 Amps) electronic circuit breaker.
tbd EB1 Single output electronic circuit breaker (3-5 amps) with status LEDs and optoisolated outputs for short circuit and block detection.
EB3 Triple output adjustable (2,3,or 4 Amps) electronic circuit breaker with status LEDs.
Accessories to help wire your layout
tbd Macro Panel Use to build turnout or CTC control panels. Issues Macro, accessory or signal commands over Cab Bus
tbd Indicator Panel Use to display block ocupancy on CTC or other control type panels. Controls 16 LEDs
tbd Light-It Layout scenery lighting controller/decoder/sequencer. 16 high power outputs
Cab bus wiring aids
UTP Panel Cab Bus fascia panel w/RJ12 connectors
DIN Panel Cab Bus panel w/DIN connectors (preferred for clubs)!
Coilcord-R6 Six foot RJ12 coil cable for cabs
RJ12-7 Seven foot RJ12 cable for UTP/DIN panel wiring
RJ12-12 Twelve foot RJ12 cable for UTP/DIN panel wiring
Coilcord-DIN 7 foot coiled cord with molded right angle DIN plug
0 RJ12-40 Forty foot RJ12 cable for RPT1 wiring
Other stuff
tba Sniff-It NCE Cab Bus and DCC packet analyzer. Uses PC with Hyperterminal
Plug pack Ten pack of NMRA 8 pin plugs
DTK Decoder tester, tests motor and 4 functions
LED pack Ten pack of Sunny White LEDs
D14SRP: This HO sized decoder is designed for the Kato RS2/RSC2 and C44-9, Stewart VO-1000, Intermountain
F7, Atlas U23B and U30B locomotives in HO Scale. The easiest installation possible, just plug it in! 1.3 Amp rating
(2 Amp peak). Six function outputs and Silent RunningTM too! Size: 0.80" x 0.65" x 0.110".
DA-SR: Easy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto
1000. This decoder has five function outputs. Size: 2.85" x 0.65" x 0.125" (thin).
P2K-SR: This HO sized decoder designed for the LifeLike Proto 2000 GP7/9/30 and SD60 locomotives in HO Scale.
The easiest installation possible, just plug it in! Note: follow LifeLike’s directions about using the correct light bulbs
for DCC. 1.3 Amp (2 Amp peak). Four function outputs, smooth and quiet. Size: 1.8" x 0.65" x 0.31".
KRS-SR: This HO sized decoder is designed for the Kato RS2/RSC2 and C44-9, Stewart VO-1000, Intermountain
F7, Atlas U23B and U30B locomotives in HO Scale. The easiest installation possible, just plug it in! 1.3 Amp rating,
(2 Amp peak). Four function outputs. Size: 1.8" x 0.65" x 0.31".
F7, Atlas U23B and U30B locomotives in HO Scale. The easiest installation possible, just plug it in! 1.3 Amp rating
(2 Amp peak). Six function outputs and Silent RunningTM too! Size: 0.80" x 0.65" x 0.110".
DA-SR: Easy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto
1000. This decoder has five function outputs. Size: 2.85" x 0.65" x 0.125" (thin).
P2K-SR: This HO sized decoder designed for the LifeLike Proto 2000 GP7/9/30 and SD60 locomotives in HO Scale.
The easiest installation possible, just plug it in! Note: follow LifeLike’s directions about using the correct light bulbs
for DCC. 1.3 Amp (2 Amp peak). Four function outputs, smooth and quiet. Size: 1.8" x 0.65" x 0.31".
KRS-SR: This HO sized decoder is designed for the Kato RS2/RSC2 and C44-9, Stewart VO-1000, Intermountain
F7, Atlas U23B and U30B locomotives in HO Scale. The easiest installation possible, just plug it in! 1.3 Amp rating,
(2 Amp peak). Four function outputs. Size: 1.8" x 0.65" x 0.31".
SW9-SR: This decoder is made to fit the LifeLike HO Scale SW9/SW1200 switcher. Easy installation exactly replaces the existing PC board in the locomotive. No need to remove
the weight. The decoder provides a means to install a white LED or 12 Volt bulb as headlight. Because the 1.5 Volt rear light in this locomotive is difficult to replace we provide a
dropping resistor right on the decoder. Three function outputs. Size: 0.100" thick - fits P2K SW8/SW9/SW1200
ATLS4-SR:This decoder is specifically designed for Atlas/Roco Alco S1, S2, S3 and S4 switchers. The decoder has 2 function outputs with built-in Golden Glow LEDs for head and
rear lights. We also include a motor isolating kit to prevent decoder damage
the weight. The decoder provides a means to install a white LED or 12 Volt bulb as headlight. Because the 1.5 Volt rear light in this locomotive is difficult to replace we provide a
dropping resistor right on the decoder. Three function outputs. Size: 0.100" thick - fits P2K SW8/SW9/SW1200
ATLS4-SR:This decoder is specifically designed for Atlas/Roco Alco S1, S2, S3 and S4 switchers. The decoder has 2 function outputs with built-in Golden Glow LEDs for head and
rear lights. We also include a motor isolating kit to prevent decoder damage
